Vehicle wraps
Change the color and finish of your vehicle without repainting it, or turn it into advertising for your business. Vinyl goes over your factory paint.
- Color changes
- Business vehicles
- Partial wraps and accents
- Chrome delete
Wrap it. Tint it. Coat it. Print it.
Fresh Upgrade is a Lancaster shop for vehicle wraps, window tint and ceramic coating, with banners, canopies, flyers and business cards printed too.
What do you want to build? Pick one:
Vehicle
Try a wrap
Gloss yellow
Business graphics
Try a tint
35% VLT
Tail light and headlight tint
Window trim
Tinted lights may not be street legal. Ask us before you choose.
Quote this look
Sample vehicles and sample designs with placeholder names. Graphics get built around your logo. See real vinyl samples at the shop.
What we do to cars
Window tint
Cut heat and glare, add privacy and protect your interior from high desert sun. Pick a shade that suits how you drive and what you want to see out of.
- Cars and trucks
- Heat and glare control
- Tail light and headlight tint
Ceramic coating
A hard, slick layer bonded to your paint. It adds gloss, sheds water and makes washing easier. It won't stop rock chips, and we'll tell you where it makes sense for your vehicle.
- Deeper gloss
- Water beading
- Easier cleaning
How dark is 20%?
Tint is measured in VLT, or visible light transmission: the share of light that gets through the glass. A lower number means a darker window.
5%Limo dark
20%Dark and private
35%Clean, medium shade
50%Light shade
70%Barely there
California limits how dark the windshield and front side windows can be. Ask us what applies to your vehicle before you choose. On-screen shades are approximate.
The tent
A full-color event tent with your artwork printed seam to seam across all four roof peaks and the valance. It comes in 10 x 10, 10 x 15 and 10 x 20 ft. The details below are for the 10 x 10.
- Fabric
- 6 oz, 600 x 600 denier weather-resistant polyester with a waterproof coating
- Printing
- Dye-sublimated, so the graphics resist scratches and weather
- Frame
- 40 mm aluminum hex frame with telescopic legs and a hand crank that expands the lattice
- Height
- Adjusts from 124.5 in to 137 in
- Weight
- 51 lb total: 43 lb frame plus 8 lb canopy
- Included
- Frame, canopy, ropes, stakes and a carrying bag
Add to the tent
Back wall
A full printed wall that works as your backdrop and helps block the wind. It attaches with sewn-in velcro loops, needs no extra hardware, and can go on any side. Single-sided, 113 x 78 in on a 10 ft tent.
Half walls
More room for your branding, and a simple way to guide people to your entrance. They hang from a telescopic pole with two clamps. Single or double-sided, 113 x 39 in on a 10 ft tent.
Table cover
Prints your logo across the front of your table, so the booth looks finished from the first glance.
Feather flags
Tall flags that catch attention from a distance and help people find your booth at a busy event.
Banner stand
A retractable stand that sets up in one pull. Graphics come in 24 x 81 in or 33 x 81 in.
Also available
Mesh sidewalls, sandbags that hold up to 50 lb each, and a wheeled carrying bag.
Channel letters we offer
Channel letters are 3D letters mounted on your building and lit with LEDs. Each style comes ready to install with an installation pattern and wiring diagram, is UL listed for outdoor use, and has a 5-year warranty.
Standard channel letters
The classic sign letter: an acrylic face with aluminum sides and a trim cap around the edge. Colors come from the acrylic or a vinyl overlay, including day/night vinyl that looks one color by day and another when lit.
- Light
- Front lit, or front and back lit
- Sides
- 3 in or 5 in aluminum
- Size
- Up to 58.5 x 136 in
Full acrylic face lit
A sturdy, simple and sleek letter. The thick white acrylic face lights up, and the stainless steel sides can be customized in color.
- Light
- Front lit
- Sides
- 2 in or 3 in stainless steel
- Size
- Up to 36 x 36 in, custom up to 48 x 48 in
Inset acrylic face lit
A white acrylic face set inside a stainless steel border. You get a clean brushed steel edge instead of a trim cap.
- Light
- Front lit
- Sides
- 2 in or 3 in brushed stainless steel
- Size
- Up to 36 x 36 in
Reverse lit
A solid stainless steel face with a clear back. The LEDs shine onto the wall behind the letter and create a glowing halo around it. Available in 35+ colors.
- Light
- Halo around the letter
- Sides
- 2 in or 3 in stainless steel
- Size
- Up to 36 x 36 in
Reverse acrylic lit
A clean, polished stainless steel face with a translucent acrylic back that lets the light out. It can mount flush on a building or stand on its own, indoors or outdoors.
- Light
- Through the back
- Sides
- 2 in or 3 in stainless steel
- Size
- Up to 36 x 36 in, custom up to 48 x 48 in
Need the letters on a single mounting rail? An optional raceway is available, 5.5 in high and 3.5 in deep, in 10 to 46 in segments.
The window perf we use
Perforated window film covers the glass with your graphic while people inside can still see out. It's a white film with a black adhesive backing and tiny holes across it, printed with UV ink for a longer-lasting, scratch-resistant finish.
- Type
- 70/30: 70% printed, 30% open
- Thickness
- 6.5 mil total: 5.5 mil vinyl, 1 mil adhesive
- Use
- Storefront and vehicle windows, indoors or outdoors
- Size
- Up to 52 in high, in long runs
We also do window decals, solid window wraps, banners, frame signs and posters. Ask us what fits your building.
Get a quote
Fill this in and send it to us. We will get back to you with a quote.
Come by the shop
Hours
Mon–Sat
10am–6pm
10am–6pm
Closed Sunday
Call or text
(661) 802-7230